Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/tape-drive-repair.com/html/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the thrive-dash domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/tape-drive-repair.com/html/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the thrive-dash domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/tape-drive-repair.com/html/wp-includes/functions.php on line 6114
HP DAT8 (C1533a / c1528a) DDS2 - Tape Drive Repairs UK | LTO Repairs | DLT Tape Drive Repairs

HP DAT8 (C1533a / c1528a) DDS2

The HP DDS-format drives have been developed by Hewlett Packard for data storage drives that build on DAT technology. The DDS-2 drive has 4-GB native capacity, yielding up to 8 GB of stored data and has data compression functionality.

The HP C1539A implements the DDS-2 format. This includes all of the features of the DDS-1 and DDS-DC formats, plus the ability to read and write with much higher

Features

• Reads and writes using DDS-1 and DDS-DC formats when using DDS-1 media
(60 m and 90 m). Has all of the features of the DDS-1 and DDS-DC formats.

• Reads and writes with much higher capacity when using DDS-2 media (120 m).
DDS-2 Drive Environmental Requirements
The DDS-2 drive has the following environmental requirements:

• Ambient Temperature
Operating 5 C to 40 C (41 F to 104 F) Non-Operating –40 C to 70 C (–40 F to 158 F)

• Altitude
Operating 0 km to 4.6 km (0 to 15,000 ft) Non-Operating 0 km to 15.2 km (0 to 50,000 ft)

• Humidity
Operating 20% to 80%RH (non-condensing) Non-Operating 5% to 95%RH (non-condensing) Maximum wet bulb temperature = 26 C

HP C1533A Specifications
Capacity 4 GB native (8 GB with hardware data compression)
Recording Format ANSI/ISO/ECMA DDS, DDS-DC, DDS-2 and DDS-3
Compression Technique DCLZ
Backup rate, compressed 3.6 GB/hr*
Backup rate, native 1.8 GB/hr
Burst Transfer Rate 3 MB/sec. max (asynchronous)10 MB/sec. max synchronous
Media DDS-2 (8GB*), DDS-1 (4GB*), DDS-1 (2.6 GB*)
Interface Single-ended narrow SCSI-2
Power Requirements DAT 8i: +5V DC, 0.8 A; +12V DC, 0.1 ADAT 8e: 100-240V. 0.5 A, 50-60 HzDAT 8eU: 100-240V, 0.8 A, 50-60 Hz
MTBF DAT 8i: 300,000 hours at 12% duty cycleDAT 8e: 200,000 hours at 12% duty cycle
* Capacities and transfer rates assume 2:1 data compression. Actual compression may differ because compression varies with data type.

 

Chris Whitehead

Chris Whitehead is a tape drive repair and data storage expert based in Reading, Berkshire, providing tape drive repair and data storage solutions across the UK.